How to Use a Kandi Kane
Select the correct tip for the size rhinestone you are setting....all tips are clearly labeled as to size: 6SS, 10SS, (12SS is available as a separate tip for $ 1.50) 16SS, 20SS, 30SS, or 34SS
IF you are setting nail heads, use the flat tip.
Plug unit into regular wall socket.... 115Volts or 215 volts..the unit doesn't care, 60hz or 50 hz...doesn't matter..
Allow unit to warm up about 2 minutes...it will be ready to go.
Dump stones into a saucer. Place garment on heat resistant surface, face up where you want to apply rhinestones...you may want to place a layer of scrape fabric between the layers if you are rhinestoning shirts. This will prevent the possibility of glue seeping through the upper layer and leaving a mark on the other side.
Use the stones that are FACE UP in the saucer! Push the correct tip over the stone, hold up and watch for glue to melt.
As soon as the glue melts, push rhinestone to fabric and immediately withdraw the Kandi Kane...do NOT leave it on the stone ...just push and pull. The stone will freeze to the fabric and pull free from the Kandi Kane.
IF you leave the tip on the stone while on the fabric, the glue will wick away from the stone, the stone will stay in the applicator tip, and you will have a mess to deal with....just down and up...simple as that.
Pick up another stone and repeat until you have the all the stones in place.
Keep tips clean by using the Kandi Kane applicator tip cleaning brush $ 4.00 from Rhinestone Guy.
Different Types of Kandi Kane:
Crystal Crafter: Hobbyist grade, nice tool for the money, does the job on size 30SS and smaller...slow on 34SS. Heats up fast, easy to use. $16.95 (free with orders of $250.00 + in heat fix rhinestones
Kandi Pro: Our choice for the hobbyist or commercial use, heats very fast, ergonomically designed grip...easy to hold over long periods of time. $ 24.95
Hot Fixer: Designed for those who set 16SS, 20SS, 30SS, 34SS Heats larger stones VERY fast, for the costumer who is in a hurry. $ 34.95
Glitz n' Go: Battery operated for the contestant who may loose a stone...instant fix on site! $11.95
This unit is the easiest to use on the market, always works if you do exactly as I have written above. Failures happen when application is incorrect...Good luck and have some fun. Use Heat Set stones on FABRIC ONLY! These stones will NOT stick to metal, rubber, plastic, or anything that is not fabric...they may seem to hold, but they will fall off if not on fabric.
If you need to stone non-fabric items, use GemTac glue and Non-heat set stones (regular flat backs).
Phil Brandt, rhinestoneguy.com, Inc
Rhinestone Guy.Com, Inc
1416 E. Wilshire, Santa Ana, CA 92705
(888) 594-7999 (714)480-1000 Fax: (714) 480-1005
Email: rhinestoneguy@yahoo.com